 | | | | | | | | | | |
 | | |||||||||
 |  |  |  |  | | |||||
 |  |  |  |  |  | | ||||
 |  | | ||||||||
 |  | | ||||||||
 | | |||||||||
 | | |||||||||
 | | |||||||||
 | | |||||||||
 |
TURNING VANE & TRACK |
 |
||
Denhaco’s
turning vane and track complement its flange system and meets the
requirements of DW144. The track fixing tool allows you to create
an extremely rigid frame to allow air movement with minimum vibration. |
|||
 |
 |
||
GASKETS Denhaco can supply gaskets for use between the flange faces. Tested to DW144/TM1, the gasket has been demonstrated under extreme conditions, as seen at the HVCA AGM’s in 2001 and 2002. The manufacturer of the gasket has supplied to the trade for many years and quality is assured. The gasket is leak proof and with a PVC coating, it has the ability to return to close to its original size, should the pressure be released. |
|||
SEALANTS The sealants in Denhaco’s range of products fully conform to DW144 and have a proven history of use in the air conditioning/ductwork industry. Denhaco also stock emulsion and solvent based sealants. Please ask for details. |
|||
CLAMPS Denhaco clamps have been tested during DW144/TM1 certification. The standard BS clamp is suitable for three sizes of flange - 20, 30 and 40. |
 |
||
BS15 CLAMP The BS15 clamp was fully tested during the BSRIA certification of the 15mm flange and is ideally suited for J1 rated ductwork with the new BS15 flange. To help reduce costs further, this smaller version of the BS Clamp has been produced, which is capable of clamping both the BS15 and BS20 Duct Flange Systems. |
|||
CHANNEL SECTION Denhaco stock channel in 1.6 and 2.5 mm gauges. Available in 3, 5 and 6 metre lengths (6 metre on request and dependent on quantity), M8 and M10 channel nuts and top plates are also available for use with Denhaco channel section. |
|||
 |
 |
||
FLEXIBLE CONNECTOR Flexible connectors prevent the transmission of vibration from the air-handling units to ductwork. Denhaco offer two variants of flexible connector - the PVC coated connector is able to perform for requirements between -30°C and +70°C, while Neoprene is fire resistant to M1 BS 476 class and operates in temperatures between -20°C and + 100°C. |
|||
STIFFENER FLANGE Denhaco stock a J3 stiffener, and a J4 stiffener is currently in production. Other sizes can be manufactured if customer demand requires it. |
|||
